All Ping options and their functions

Example .. In DOS .. c:>ping 192.168.0.1 -t
-t Ping the specifed host until interrupted
-a Resolve addresses to hostnames
-n count Number of echo requests to send
-l size Send buffer size
-f  Set Don't Fragment flag in packet
-i TTL Time To Live
 -v TOS Type Of Service
-r count Record route for count hops
-s count Timestamp for count hops
-j host-list Loose source route along host-list
-k host-list Strict source route along host-list
-w timeout Timeout in milliseconds to wait for each reply
Experiment to see how helpful these can be!

Multiple login in yahoo Without Using any Software

Multiple login in yahoo Without Using any Software

You can login with multiple id's on the same yahoo messenger without any download or patch .
Follow these steps :
 
1.   Go to Start ----> Run . Type regedit, then enter .

2.  Navigate to HKEY_CURRENT_USER --------> Software ---> yahoo  --->pager---->Test

3.  On the right page , right-click and choose new Dword value .

4.  Rename it as Plural.

5.  Double click and assign a decimal value of 1.

Its done!!
Now close registry and restart yahoo messenger and try Multiple Login

Some Useful Nokia mobile phone Secret Codes list

  On the main screen type
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
 
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
 
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

Unlock service provider: Insert sim, turn phone on and press vol up-arrow keys) for 3 seconds, should say pin code. Press C, then press * message should flash, press * again and 04*pin*pin*pin#

*#7328748263373738# resets security code.
Default security code is 12345

Free Bsnl Gprs To Access Internet

U Can Surf For Free Via Gprs On Pc Too I came to know of using BSNL GPRS for FREE with FULL ACCESS to All Sites. Here is the way. 1.Create 2 connections with different names like "BSNL PORTAL" and "CELLONE PORTAL" with following settings.   Access Point Name- "celloneportal" Proxy Service Address- "192.168.51.163" Proxy Port- "8080" Security- "NORMAL"

Rest fields to be as it is.

2.now open phone's default inbuilt browser and select any of the two settings created to access the web.you will now access only bsnl's home site.

3.now keep browser working and open another browser for full internet access like opera or netfront.in these browsers use the second setting created. make sure to use second setting this time. connect to open a page. you get an error message like "ACCESS DENIED" but you don't worry.

4.keep both browsers working in background and open connection manager. in connection manager just disconnect the connection that is not working like the second one you used to connect opera or net front.

5.again open opera or netfront from background and this time use the first connection that you are using to connect with default inbuilt browser to connect to internet.

6.sure this time you are connected with full access.

Airtel Hack For Free Internet

FIRST METHOD You need a PC or a Laptop and the required connectivity tools ,ie., Serial/USB cable OR Infrared Device OR Bluetooth dongle 1) Activate Airtel Live! ( It’s FREE so no probs) 2) Create TWO Airtel gprs data accounts (yep TWO) and select the FIRST as the active profile. 3) Connect your mobile to the PC (or Laptop) and install the driver for your mobile’s modem. 4) Create a new dial-up connection using the NEW CONNECTION Wizard as follows:

Connecting Device : Your mobile’s modem
ISP Name : anyname (anything you like)
Phone Number : *99***3# / Try 99***1
Username and Password : blank
5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)
6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).
7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.
8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT
9) After a few seconds the page will start to load and you have the
Whole Internet at your Disposal.

SECOND METHOD:

First Go to settings menu then to connectivity tab now choose the option Data comm. then "DATA ACCOUNTS" go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
User name: (blank)
Password: (blank)

Now save it NOW! Go to Internet Setting in connectivity here choose intrnet profile--go to new profile setting are As below NAME:A1 CONNECT USING:A1(which was created in data comm.) Save It Now you would be able to see it now selest it and take "more" option then select setting here in use proxy option it will be selected no if it is no then change it into yes Now Go to Proxy address and give the adress as 100.1.200.99 and then the port number as 8080 User name: Password:

Now save all the settings You made . Come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we created leave the use Proxy option as no itself
TheseAre The Settings
now access airtellive! from ur activated SE phone goto VIDEO GALLERY OR VIDEO UNLIMITED(varies according to states) choose live streaming then choose CNBC OR AAJTAK WHILE CONNECTING TO MEDIA SERVER cancel AFTER 9 or 10 sec then type any web adress if it shows access denied then once again select CNBC and wait for a few more sec than before if its fully connected also no prob its free then cancel it or if ur connected then stop it and the internet is ready to take of .GOOD LUCK SE AIRTEL USERS

Boot Or Start Computer Faster

   Many computers take a lot of time to boot (or start ).This is due to many reasons.

Some slight changes can do wonders for your system:

1. Press start->run then type msconfig and press enter.

Go to the startup tab. Here you will see a list of startup items. These are all the programs that automatically start when you boot your PC. It is these that slow down the boot up process.
                                 So uncheck all the unwanted items like ms-office, messengers other utilities that u may not need at startup). Don't uncheck your antivirus software.

Restart your Pc to and see for yourself, your pc will now boot faster....  
    
2. A great new feature in Microsoft Windows XP is the ability to do a boot defragment. This places all boot files next to each other on the disk to allow for faster booting. By default this option is enabled, but on some systems it is not, so below is the information on how to turn it on:

Go to Start Menu and Click Run
Type in regedit then click ok
Find "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOpt imizeFunction"
Select "Enable" from the list on the right
Right on it and select "Modify"
Change the value to Y .
Reboot your Pc and see the change yourself.
 
3.SPEED UP BOOT BY DISABLING UNUSED PORTS.!!
You may have tried many tweaks like modifying windows XP start-up applications, prefetches, unload DLLs method, etc. And yes those methods do work for me.
                    I have just accidentally found out another way to give you an extra boost in windows XP's boot performance. This is done by disabling your unused devices in Device Manager. for example, if you don't have input devices that are connected to one of your USB's or COM ports, disabling them will give you an extra performance boost in booting. Go to Control Panel -> System -> Hardware tab -> device manager Disable devices that you don't use for your PC and then restart.

Improve Windows XP Shutdown Speed

  This tweak reduces the time XP waits before automatically closing any running programs when you give it the command to shutdown.
Go to Start then select Run
Type 'Regedit' and click ok
Find 'HKEY_CURRENT_USER\Control Panel\Desktop\'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now select 'HungAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
 
Now find 'HKEY_USERS\.DEFAULT\Control Panel\Desktop'
Select 'WaitToKillAppTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK'
Now find 'HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\'
Select 'WaitToKillServiceTimeout'
Right click and select 'Modify'
Change the value to '1000'
Click 'OK